Operating Guide

Light Duty Floor Cable Protectors are ideal as a temporary
solution to cover cords across open areas with light foot
trac.
The 0.75" x 0.34" cavity can accommodate 2x 0.31"
outer diameter flex cables.
• Ideal for areas with light foot trac
• Address a common cause of trips and falls
• Can protect up to 2x 0.31" diameter cables
• Ribbed non-slip base, pre-split rear for ease of use
• Flexible PVC - simply uncoil to lay flat
• Neat tapered design
Medium Duty profiles uncoil to eectively lay flat across
surfaces, while the tapered sloping sides are pedestrian-
friendly.
The pre-split back enables users to simply retro-fit the
length over the cables. Then cables are contained within
the cavity.
Unique connector pins provide an eective friction-fit
connection that can be pushed-in, then later pulled apart,
in adjoining lengths – to cover whatever length of cable is
required.
• Ideal for areas with regular foot trac
• Protect up to 3x 0.31” diameter cables, and address a
common cause of trips and falls
• Ribbed non-slip base, pre-split rear for ease of use
• Flexible PVC - simply uncoil to lay flat
• Neat tapered design
6’ & 30’ Length options
Light Duty
Floor Cable Protector
Linkable Medium Duty
Floor Cable Protector
0.75”
0.34” 0.47”
2.5”
6’ & 30’ Lengths
1.2”
3.25”
0.39”
0.55”
D-Line Products Lowes May19.qxp_Layout 1 22/05/2019 10:42 Page 8