User manual

DCS-855L

English

Mounting your camera (optional)

• If desired, the cable can be concealed behind the

mounting bracket. Run the cable through the back

of the mounting bracket, securing it with the built-

in guides. Be sure to leave enough cable length

protruding to allow connection to the camera.

• Depending on the material of the wall or ceiling,

use proper tools to drill two holes 25mm deep with

a 6mm drill bit where you marked. After drilling

the holes, insert the plastic anchors to support the

screws.

• Place the mounting bracket where you want to

position the camera and use a pencil to mark the

holes.

• Fasten the mounting bracket to the wall using the

screws provided.

• Using the supplied thumbscrew, fasten the camera

to the mounting bracket. Connect the power cable

to the camera.

• Adjust the angle of the arm on the mounting bracket

as required. Tighten the thumbscrew to lock the arm

in place.