User manual

6 Command Line Interface D-Link Web Smart Switch User Manual
9
9
7
7
Example usage:
To configure the account admin password:
DGS-1210-52> config account admin pass word 1234
DGS-1210-52>
save
Purpose To save changes in the Switch’s configuration to non-volatile
RAM.
Syntax
save
Description
The save command saves the configuration changes to the
memory.
Parameters None.
Restrictions None.
Example usage:
To save the Switch’s current configuration to non-volatile RAM:
DGS-1210-52> save
Building configuration ...
[OK]
DGS-1210-52>
debug info
Purpose To display the ARP table and MAC FDB information of the
Switch.
Syntax
debug info
Description
The debut info command displays the ARP table and MAC FDB
of the Switch.
Parameters None.
Restrictions None.
Example usage:
To display the ARP table and MAC FDB information of the Switch:
DGS-1210-52> debug info
% segmentation fault log file:
File doesn’t exist !!!
% ARP table :
Address Hardware Address Type Interface Mapping
------- ------ ----------- ---------------- ------ ------------- -------------
10.90.90.90 00:18:8b:bf:75:30 ARPA vlan1 Static