User manual

5 Configuration D-Link Web Smart Switch User Manual

Figure 5.86 – Add Access Profile

The steps of adding an access profile are described below:

1) After selecting the Profile ID and Frame Type (MAC, IPv4 or IPv6), specify attributes like

Untagged/Tagged (for MAC), ICMP/IGMP/TCP/UDP (for IPv4), or ICMP/TCP/UDP (for IPv6). Click Select

and a simplified frame diagram will be displayed.

Figure 5.87 – Add Access Profile

The Add ACL Profile Page contains the following fields:

Parameter Description

Profile ID

Select an unique identifier number for this profile set. This value is from 2

to 50.