User manual

5 Configuration D-Link Web Smart Switch User Manual
70
Figure 5.88 – Add Access Profile (MAC ACL)
The Add ACL Profile MAC ACL contains the following fields:
Field Description
Source MAC Mask
Enter a MAC address mask for the source MAC address, e.g. FF-FF-FF-
FF-FF-FF.
Destination MAC Mask
Enter a MAC address mask for the destination MAC address, e.g. FF-FF-
FF-FF-FF-FF.
802.1p
Selecting this option instructs the Switch to examine the 802.1Q VLAN
identifier of each packet header and use this as the full or partial criterion
for forwarding.
VLAN ID
Selecting this option instructs the Switch to examine the 802.1p priority
value of each packet header and use this as the, or part of the criterion for
forwarding.
Ether Type
Selecting this option instructs the Switch to examine the Ethernet type
value in each frame’s header.
Click Add button then the ACL profile is added.
To define the IPv4 ACL ICMP profile: Select IPv4 ACL with ICMP and click Select button. The updates to
show the follows: