User manual

5 Configuration D-Link Web Smart Switch User Manual
7
7
3
3
The Add ACL Profile IPv4 ACL TCP port page contains the following fields:
Field Description
Source Port Mask
Defines the range of source Ports relevant to the ACL rules. (0=ignore,
1=check).
For example, to set 0 – 15, set mask of FFF0.
Destination Port Mask
Defines the range of destination IP addresses, relevant to the ACL rules.
(0=ignore, 1=check).
For example, to set 0 – 15, set mask of FFF0.
TCP Flag
Sets the TCP Flag Type field as an essential field to match.
Click Add button then the ACL profile is added.
To define the IPv4 ACL UDP profile: Select IPv4 ACL with UDP and click Select button. The updates to
show the follows:
Figure 5.92 – Add Access Profile (IPv4 ACL UDP)
The Add ACL Profile IPv4 ACL UDP port page contains the following fields:
Field Description
Source Port Mask
Defines the range of source Ports relevant to the ACL rules. (0=ignore,
1=check).
For example, to set 0 – 15, set mask of F.
Destination Port Mask
Defines the range of destination IP addresses, relevant to the ACL rules.
(0=ignore, 1=check).
For example, to set 0 – 15, set mask of F.
Click Add button then the ACL profile is added.
NOTE: A combination of one or several filtering
masks can be selected simultaneously. The page
updates with the relevant field(s).