User manual

5 Configuration D-Link Web Smart Switch User Manual
74
To define the IPv6 ACL ICMP profile: Select IPv6 ACL with ICMP and click Select button. The updates to
show the follows:
Figure 5.93 – Add Access Profile (IPv6 ACL ICMP)
The Add ACL Profile IPv6 ACL ICMP address page contains the following fields:
Field Description
Source IP Prefix
Defines the range of source IP addresses, relevant to the ACL rules.
(0=ignore, 1=check).
For example, to set 2002:0:0:0:0:0:b0d4:0, use mask 128
Destination IP Prefix
Defines the range of destination IP addresses, relevant to the ACL rules.
(0=ignore, 1=check).
For example, to set 2002:0:0:0:0:0:bfd4:0, use mask 128
ICMP Type
Sets the ICMP Type field as an essential field to match.
ICMP Code
Sets the ICMP code field as an essential field to match.
Click Add button then the ACL profile is added.
To define the IPv6 ACL TCP profile: Select IPv6 ACL with TCP and click Select button. The updates to
show the follows: