User manual

6 Command Line Interface D-Link Web Smart Switch User Manual

cfg_fromTFTP − Download a switch configuration file from a

TFTP server.

<ipaddr> − The IPv4 address of the TFTP server.

<ipv6addr> − The IPv6 address of the TFTP server.

<path_filename> −

The filename of the firmware or switch

configuration file on the TFTP server. You need to specify the

DOS path if the file is not at the root directory of the TFTP server.

Restrictions None.

Example usage:

To download a firmware file:

DGS-1210-52> download firmware_fromTFTP 1.1.1.23 1\dgs_1210-10032.ros

01–J an–2000 01:19:48 %COPY–I–FILECPY: Files Copy – s ource UR L tftp://1.1.1.23 /1\

dgs_1210—10032.ros des tination UR L Unit all flash://image

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!01–Jan–2000 01:22:49 %COPY–W –TRAP:

The copy operation was completed succes sfully

3920460 bytes copied in 00:03:01 [hh:mm:s s ]

DGS-1210-52>

Note: Switch will reboot after restore and

all current configurations will be lost.

upload

Purpose To upload the firmware file or a Switch configuration file to a

TFTP server.

Syntax

upload { firmware_fromTFTP | cfg_fromTFTP } {<ipaddr> |

Description

The upload command uploads the Switch’s current settings to a

TFTP server.