Systems IP Phone User Manual

11
NOTE 1: If you made any modifications, you may quit setup at any time by pressing MENU + OK to save and exit
or MENU + CANCEL to quit without saving. The phone will automatically exit from the menu screen if there are
no inputs from the user.
NOTE 2: Use
or to select ENABLE or DISABLE.
NOTE 3: The left arrow key
can be used as the Backspace key.
3.2. Display Name
z Press
z Enter the display name
3.3. ADSL Dialup
Some Internet Service Providers (mostly ADSL) use PPPoE, which requires that the user enter an ID and a
password to access the Internet. In this case, enable ADSL DIALUP and enter the PPPoE ID and PPPoE
password.
3.3.1. Enable ADSL Dialup
z Press
z Use
to select “Enable”
3.3.2. Setup ADSL ID
z Press
z Use to select “Enable”
3.3.3. Setup ADSL Password
z Press
z Enter ADSL Password
Display Name:
Your name
ADSL ID:
MY_ADSL_ID
ADSL DIALUP:
ENABLE
ADSL Password:
*
******