Systems IP Phone User Manual

23
Hardware Version
Hardware version of the IP phone
Firmware Version
The current firmware version installed on the DPH-150S
DSP Version
The current version of the DSP application installed on the DPH-150S
MAC Address
MAC address of the IP phone
NAT Mode
The NAT mode (Router or Bridge) of the LAN interface
6.3. System – Management
User Name
Configuration menu login name
Current Password
Configuration menu login password
New Password
Enter a new password to replace the current one
Confirm Password
Enter the new password again to confirm the change
Get Time From
Get time setting from SIP or NTP server
NTP Server IP
Network Time Protocol (NTP) is a protocol used to help match your system
clock with an accurate time source (ex. atomic clock, time server). It is good
practice to have all your networked computers synchronized with one server.