Systems IP Phone User Manual

32
Prack
A SIP method which is applied to the condition of acknowledging provisional
responses like 180 Ringing. Select Enable for a more reliable connection.
Session Refresher
Select None to disable SIP session timer support.
Select UAC to initiate SIP request.
Select UAS to receive SIP request and then return a response.
Session Timer Method
Select SIP request method. Default method is Invite.
UDP/TCP
Select SIP signal transmission method. Default method is UDP.
Register with Proxy
When “Send messages via Outbound Proxy” is enabled, all the SIP requests
including Register will be sent through Outbound Proxy. Enabling “Register
with Proxy” will be against this rule and send SIP Register directly to the
Registrar as described in section 6.13.
6.16. VoIP – SIP Account Settings
Default Account
When you dial a number, the default account is used to dial. The User Name
of default account is displayed on the receiver’s IP phone.
Account Active
Enable or disable this account.
Display Name
Name displayed on the LCD screen of the called party.