User manual

Section 3 - Configuration

D-Link DSL-321B User Manual

For PPPoE/PPPoA connection

Type in the Username and Password (and PPPoE Service Name, if

required by your ISP).

Type service name which is from your ISP on the

Servername

option.

Choose PPPoE LLC, PPPoE VC-mux, PPPoA LLC and PPPoA

VC-mux.

Set MTU value which you want but should be less than 1492 on the

MTU

Set the time which your data doesn’t pass through the connection, it will

be disconnected on the Idle Time Out. The default time is 0 and it

means it is always on.

Set PPP authentication method, it can be Auto, PAP and CHAP. The

default authentication method is Auto and it means authentication

accept PAP and CHAP both.

Set NAT to Enable when you want to have WAN and LAN. The default

mode is Disabled.

Set IGMP mode when you want to let IAD to play as an IGMP proxy who

can help proxy server to send IGMP query packets to the IPTV clients, it

can be disable, IGMP-V1 and IGMP-V2. The default mode is disabled.

Set Default Route mode to enable or disable default route, in order to

access Internet, suggest enable default route. The default mode is

enabled.