User manual

Section 3 - Configuration
D-Link DSL-321B User Manual
37
OUTBOUND FILTER
By default, all outgoing IP traffic from the LAN is allowed. The Outbound Filter allows you to create a filter rule to block outgoing IP traffic by
specifying a filter name and at least one condition below. All of the specified conditions in this filter rule must be satisfied for the rule to take effect.
ADD OUTBOUND IP FILTER
Type the filter name on the
Filter Name
.
Choose TCP, UDP or ICMP on the
Protocol
.
Type
Source IP address
,
Source Subnet Mask
and
Source Port
Type
Destination IP address
,
Destination Subnet
Mask
and
Destination Port
Please click
Add/Apply
button to add the policy in
the list.