This product can be set up using any current web browser, i.e., Internet Explorer 6 or Netscape Navigator 6.2.3. DSL-G604T ADSL Modem Router Before You Begin 1. 2. If you purchased this Router to share your high-speed Internet connection with other computers, you must have an established Internet account from an Internet Service Provider (ISP). It is best to use the same computer that is connected to your ISP for configuring the DSLG604T ADSL Modem Router.
Connecting the Router to your Computer 1. 2. 3. 4. First, connect the power adapter to the power input at the back panel of the DSL-G604T and then plug the other end of the power adapter to a wall outlet or power strip. On the front of the device, the Power LED will turn ON to indicate proper operation. Insert one end of the Ethernet cable into an Ethernet port on the back panel of the DSL-G604T and the other end of the cable to an Ethernet Adapter or available Ethernet port on your computer.
Configuring the Router via the D-Link Click’n Connect Utility Insert the CD-ROM into your PCs CD Drive. The Click’n Connect utility should appear automatically. If it does not appear, explore your CD-ROM drive within Windows, and double-click on the file “dslutility.exe” to start the utility manually. You can select one of five options: 1. 2. 3. 4. 5. User Manual: This option will open up the DSL-G604T user manual. You will need Adobe Acrobat Reader installed to view the manual.
Configuring the Router via the D-Link Click’n Connect Utility The Click’n Connect utility will guide you through the installation process stepby-step. Follow the on-screen instructions, then proceed to the next step. Step 1 - Power Up the Device Follow the onscreen instructions, then Click Next to continue Connect the Power Adapter from the wall socket to the DSL-G604T. Wait for the Status LED to blink before proceeding onto the next step.
Configuring the Router via the D-Link Click’n Connect Utility The Click’n Connect utility will guide you through the installation process stepby-step. Follow the on-screen instructions, then proceed to the next step. Step 2 – Connect the Device to your Computer Follow the onscreen instructions, then Click Next to continue Connect the Ethernet cable from the computer to one of the LAN ports (numbered 1 to 4) on the DSL-G604T now.
Configuring the Router via the D-Link Click’n Connect Utility The Click’n Connect utility will guide you through the installation process stepby-step. Follow the on-screen instructions, then proceed to the next step. Step 3 – Connect the Device to the ADSL Line Follow the onscreen instructions, then Click Next to continue Connect your ADSL telephone line from the wall socket to the DSL-G604T ADSL socket.
Configuring the Router via the D-Link Click’n Connect Utility The Click’n Connect utility will guide you through the installation process stepby-step. Follow the on-screen instructions, then proceed to the next step. Step 4 – Checking Device Connectivity The Click’n Connect utility will now check the DSL-G604T to make sure it has been connected correctly. Once it has successfully detected your modem, it will proceed to the next step automatically.
Configuring the Router via the D-Link Click’n Connect Utility The Click’n Connect utility will guide you through the installation process stepby-step. Follow the on-screen instructions, then proceed to the next step. Step 5 – ISP Configuration Select your Country Select your ISP Click Next to continue You will now be prompted to select your Country as well as your Internet Service Provider (ISP).
Configuring the Router via the D-Link Click’n Connect Utility The Click’n Connect utility will guide you through the installation process stepby-step. Follow the on-screen instructions, then proceed to the next step. Step 6 – Account Configuration Enter your ISP Username Enter your ISP Password Click Next to continue Re-Enter your ISP Password At this step, you will be required to enter your ADSL account Username, as provided by your ISP.
Configuring the Router via the D-Link Click’n Connect Utility The Click’n Connect utility will guide you through the installation process stepby-step. Follow the on-screen instructions, then proceed to the next step. Step 7 – Set Wireless Connection Click Next to continue Select your Wireless Radio Preference You will now be asked if you would like to enable your Wireless Radio. The wireless radio is what the router uses to provide wireless networking functionality to your wireless computers.
Configuring the Router via the D-Link Click’n Connect Utility The Click’n Connect utility will guide you through the installation process stepby-step. Follow the on-screen instructions, then proceed to the next step. This section is only relevant if you enabled the Wireless Radio on your DSL-G604T Router at Step 7. If you disabled the Wireless Radio, please proceed to page 11.
Configuring the Router via the D-Link Click’n Connect Utility The Click’n Connect utility will guide you through the installation process stepby-step. Follow the on-screen instructions, then proceed to the next step. Step 8 – Completing Setup Click Next to continue The Click’n Connect Utility will now save the settings you have entered to the DSL-G604T modem, and verify that you have entered your account details correctly to ensure an Internet connection can be established.
Configuring the Router via the D-Link Click’n Connect Utility The Click’n Connect utility will guide you through the installation process step-by-step. Follow the on-screen instructions, then proceed to the next step. Step 9 – Setup Complete Click Finish to close the Click’n Connect Utility If you have arrived at this screen, this means that your Internet connection has been successfully established and all the details that you have entered are correct.
Configuring the Router via the Web Interface Now it is time to configure the Router. Enter 10.1.1.1 into the URL address box. Open your Web browser and type http://10.1.1.1 into the URL address box. Press Enter or Return. The login dialog appears: When you first log in, your Login Name is admin and your password is also admin. These may be changed later.
Configuring the Router via the Web Interface Once you have logged in, the Home directory tab is prominent with the setup Wizard window displayed. Most users will be able to use the setup wizard to establish the ADSL connection to your ADSL Internet Service Provider (ISP). To begin using the setup wizard, click on the Run Wizard button in the middle of the web page. Click the Run Wizard button. A pop-up window will appear. This pop-up window is the Setup Wizard.
Configuring the Router via the Web Interface The first Setup Wizard window lists a summary of the steps required to complete the setup. Click the Next button to begin setup. Click the Next button.
Configuring the Router via the Web Interface Configure the time zone used for the Router’s system clock. Select the appropriate time zone setting for your location. Click Next to continue. Select the time zone you are located in. Click the Next button. Next you will set the Internet connection type for the WAN interface. Click the Next button.
Configuring the Router via the Web Interface Configure the Internet connection type for the WAN interface. Your ISP has given this information to you. If you do not know what type of connection to use, exit the Setup Wizard and contact your ISP for the information. The Setup Wizard window that appears when you click the Next button depends on what connection type you select. The connection types available are PPPoE/PPPoA , Dynamic IP Address, Static IP Address, and Bridge Mode.
Configuring the Router via the Web Interface PPPoE / PPPoA Connection If you selected the PPPoE/PPPoA connection type in the previous window, you will see the Setup Wizard window pictured here. Type in the Username and Password used to identify and verify your account to the ISP. If you have been instructed to change the VPI number and VCI number, type in the new values. Select the Connection Type used for encapsulation specific to your service. Click Next to go to the Set Wireless LAN Connection window.
Configuring the Router via the Web Interface Wireless LAN Connection Configure the SSID and Channel for the Wireless LAN. You may also configure either WEP or WPA security settings at this time or configure them later using the web manager. Select None to configure either WEP or WPA later. To disable the wireless access point, click the Enable AP option box to remove the green check mark. Click Next to continue to the final menu. Uncheck this box to disable the wireless AP.
Configuring the Router via the Web Interface Wireless LAN Connection for WEP If you are configuring WEP security, select the Authentication Type, Cipher rate and Encryption Key. Click Next to continue to the final menu. Uncheck this box if you want to disable the wireless AP. Enter the SSID name and Channel number for the Wireless LAN. Select an Authentication Type and Cipher. Choose WEP. Enter an Encryption Key. Click the Next button.
Configuring the Router via the Web Interface Wireless LAN Connection for WPA If you are configuring WPA security, select the type of WPA: WPA, WPA2, or AnyWPA, enter a Group Key Interval in seconds, and enter a PSK String. Click Next to continue to the final menu. Uncheck this box if you want to disable the wireless AP. Enter the SSID name and Channel number for the Wireless LAN. Choose WPA. Select the type of WPA security to employ on your Wireless LAN. Enter a Group Key Interval and PSK String.
Configuring the Router via the Web Interface Setup Completed All the settings for the connection are now completed. Click the Restart button to save the new settings and restart the Router. The following Restarting window will open to indicate the system is in the middle of rebooting. It will take about two minutes to restart the Router. Click the Restart button. Do not turn off the Router while it is restarting! Your web browser will now automatically be launched to the Router’s opening window.
Appendix Configuring IP Settings To connect to the network, make sure the network adapter in your computer is configured properly. The following section describes how to configure the network adapter to obtain an IP address automatically for the DSL-G604T ADSL Router. For Microsoft Windows XP Go to Start > select Settings > click Control Panel > Double-click on the Network Connections icon Double-click on Network Connections Right-click the Local Area Connection icon, and then select Properties.
The dialog box displays with a list of currently installed network items. Click Internet Protocol (TCP/IP) Click Properties Make the choice to get IP settings assigned automatically.
Technical Support You can find software updates and user documentation on the D-Link website. D-Link Australia 1 Giffnock Avenue, North Ryde, NSW 2113 Sydney, Australia TEL: +61-2-8899-1800 FAX: +61-2-8899-1868 Australia: 1300-766-868 New Zealand: 0800-900-900 URL: www.dlink.com.au www.dlink.co.nz E-MAIL: support@dlink.com.