Installation Guide
• While holding the tailpiece in place, slide the beveled rubber washer onto the tail-
piece beveled side up. Follow with a metal washer ( if provided ) and mounting
nut.
• Tighten mounting nut. Nut torque just needs to be enough to seat tailpiece flange
firmly into Vessel. Do not over tighten. Remove any excess sealer inside the
Vessel with a soft cotton rag.
• Your sink is now installed and ready for the drain trap to complete the drain instal-
lation.
Any questions with the installation of your new Lautus Marble Vessel Sink, please
call us at (877) 322-3600. We will be happy to assist you. Or look at our website at
www.dvontz.com/drains for more options.
Copyrights 2004 D’Vontz L.L.C.
#AC100