Service manual

Page 4-7
DaCor builT-in Dishwasher serviCe Manual
Door Spring
Remove dishwasher cabinet. See previous section detailed instructions.
Raise spring support rod out of mounting hole of “C” arm. (See Figure 38)
Reinstall door spring using reverse procedure.
Hinge “C” Arm
Remove dishwasher cabinet. See CABINET REMOVAL for detailed instructions.
Remove door spring. See previous section for detailed instructions.
Remove two screws that attach inner door panel to hinge.
Remove hinge retainer from hinge pin. Then remove hinge. (See Figure 39)
Replace hinge and install a new hinge retainer.
Reverse order procedure to complete assembly.
1.
2.
3.
1.
2.
3.
4.
5.
6.
FIGURE 37 FIGURE 38
End of spring rod goes into hinge
FIGURE 39
Hinge Retainer
Spring Glide
Spring
Spring Rod