Dimensions Guide

Important: Dacor reserves the right to change specications without notice. Dimensions provided are for reference only. Before installation,
consult the installation instructions accompanying each product prior to selecting cabinetry, making cutouts or starting installation.
www.Dacor.com
Renaissance
®
Gas Range
Revised 06/02/15
Models:
Product tolerances: ±1/16” (±1.6 mm)
DYRTP366S/LP
DYRTP366S/LP/H
DYRTP366S/NG
DYRTP366S/NG/H
DYRTP486S/LP
DYRTP486S/LP/H
DYRTP486S/NG
DYRTP486S/NG/H
A
3 3/8”
(8.6 cm)
7/16”
(1.1 cm)
7 3/4”
(19.7 cm)
Trim:
1/4”
(6.4 mm)
thick
25 3/8” (64.5 cm)
1 1/4” (3.2 cm) cooking surface
height (grate level) above
countertop
3/4” NPT gas inlet, connects to regulator
from bottom or rear of unit, end is recessed
2” (5.1 cm) from chassis bottom
26 5/16” (66.8 cm)
27 5/16” (69.4 cm)
Power cord
40” long
1
Vertical to combusible surface from
rangetop grate level; if installing an
overhead vent hood, also check hood
specifications for minimum required
clearances.
2
See Cabinet/Countertop Dimensions
(Top View).
3
This specification not applicable for
cabinets more than a horizontal dis-
tance of 10” (25.4 cm) from the edge
of the rangetop.
Rangetop
Model
A B C
DYRTP366
35 7/8”
(91.1 cm)
36” (91.4 cm)
36” (91.4 cm)*
42” (106.7 cm)**
DYRTP486
47 7/8
(121.6 cm)
48” (121.9 cm)
48” (121.9 cm)*
54” (137.2 cm)**
* Minimum ** Recommended
See note 2
C
13” (33.0 cm)
max.
3
Top of
finished
counter
Grate
level
Grate
level
15” (40.6 cm)
min.
1, 3
30” (76.2 cm)
min.
1
Cutout for
utility access
B
C