Installation Instructions Discover y™ Cooktop Models: EG366, EG486 THIS APPLIANCE HAS BEEN TESTED IN ACCORDANCE WITH THE LATEST EDITION OF ANSI Z21.1 STANDARD FOR HOUSEHOLD GAS APPLIANCES. Part No. 102025 Rev.
Table of Contents Important Safety Instructions........................................... 1 Important Information About Safety Instructions............... 1 General Safety Precautions.............................................. 2 Installation Requirements................................................. 3 Electrical Requirements.................................................... 3 Gas Supply Requirements................................................ 3 Product Dimensions................................
Important Safety Instructions Important Information About Safety Instructions IMPORTANT: If you smell gas: • • Do not use or light any appliance. • Do not touch any electrical switch or use any electrical devices, including the telephone, in your building. • From a neighbor’s phone, immediately call the gas supplier. Follow the gas supplier’s instructions. • If you cannot contact the gas supplier, call the fire department.
Important Safety Instructions General Safety Precautions To reduce the risk of fire, electric shock, serious injury or death when using your appliance, follow basic safety precautions, including the following: WARNING • Read the accompanying use and care manual completely before operating this appliance. • Keep packaging materials away from children. Plastic sheets and bags can cause suffocation. • If you receive a damaged product, immediately contact your dealer or builder.
Installation Requirements warning • Observe all governing codes and ordinances during planning and installation. Contact your local building department for further information. • To prevent an electric shock hazard, the power supply must meet the specifications stated below. The electrical and gas supply data on this page is for reference only. If the requirements below do not agree with the product data label, use the data on the product data label.
Installation Requirements Cabinet and Countertop Layout warning To avoid the risk of fire or personal injury, all minimum and maximum specified clearances on this and the following pages must be maintained or exceeded. • The installation must allow access to the underside of the cooktop for service and inspection purposes, including the ability to turn off the cooktop gas supply valve and electrical outlet. • All contact surfaces between the cooktop and the counter must be solid and level.
Installation Requirements Cabinet/Cutout Dimensions 10” (25.4 cm) to combustible side wall Min. both sides Cabinet tolerances +1/16” (+1.6 mm) -0 unless otherwise noted. 1 1/2” (3.8 cm) typical countertop thickness 1/2” (1.3 cm) overhang, both sides B 7 3/4” (19.7 cm) Recommended gas and electrical service location, consult local code Cooktop platform 1” (2.5 cm) Min. thickness 36” (91.4 cm) typical Cabinet/Countertop Dimensions - Front View 13” (33.0 cm) max.
Installation Requirements Cabinet/Countertop Dimensions (cont.) Cutout tolerances +1/16” (+1.6 mm) -0 unless otherwise noted. Gas and electrical connections at right rear section of chassis Gas connection and power cord may be routed through bottom or back of chassis Increase countertop and overhang additional 2 1/2” (6.4 cm) min. for combustible rear wall above countertop Non-combustible rear wall, rear of mounting platform 10” (25.4 cm) min. to combustible wall above countertop, both sides 3/8” (1.
Installation Requirements Non combustible rear wall recommended 3/8” (1.0 cm) min. countertop overhang 2 5/8” (6.7 cm) 10” (2.5 cm) min. to combustible wall above countertop, both sides E Open to below to allow for raised vent, gas and electrical connections 1/2” (1.3 cm) countertop overhang 11 7/16” (29.1 cm) Countertop CL Countertop 24 5/8” 15” (62.5 cm) (38.1 cm) 1/2” (1.3 cm) countertop overhang 1” (2.5 cm) thick mounting platform min. Hole 1/2” dia. (1.
Installation Instructions Cooktop Installation Unpack the Cooktop warning • If the gas and electric service provided does not meet the product specifications, do not proceed with the installation. Call the dealer, the gas supplier or a licensed electrician. • The cooktop is heavy. A minimum of two people are required to safely install it. Unpack the parts box and verify that all required components have been provided. If any item is missing or damaged, please contact your dealer immediately.
Installation Instructions Gas Line Connection warning • Verify that the gas supply meets specifications before connection. See page 3. • The maximum gas supply pressure to the regulator must never exceed 1/2 pounds per square inch (psi) or 3.5 kPa. • Do not install or use the cooktop without the included gas regulator installed. • Ensure that the arrow on the regulator points in the direction of the gas flow, towards the cooktop.
Installation Instructions Burner Component Installation warning • Never attempt to operate the cooktop with any of the burner parts removed. • Do not attempt to adjust the burner air mixture settings. All adjustments are preset at the factory. • Remove the burner parts and grates from their shipping packages. • Install the burners as shown. When installing the burner components, twist each piece back and forth slightly until it drops completely into place.
Installation Instructions Burner Knob Installation caution Installing the cooktop knobs in the wrong position may result in damage to the cooktop griddle. The knobs for the center burners are marked with the maximum griddle settings. There are two (2) different types of knobs supplied with the cooktop. The knobs for the center burners have the words MAX GRIDDLE on them. • Put the knobs with the words MAX GRIDDLE on them onto the inner (center burner) valve shafts.
Installation Instructions Verifying Proper Operation NOTE: If the cooktop does not operate properly, follow these troubleshooting steps: warning • • Make sure that power to the electrical outlet is turned off at the circuit breaker or fuse box and that the gas is turned off at the gas supply valve before proceeding. The cooktop must be properly grounded at all times when electrical power is applied. Prior to operating the cooktop, read the accompanying use and care manual carefully. 1.
Installation Instructions Installation Checklist warning • To ensure a safe and proper installation, the following checklist should be completed by the installer to ensure that no part of the installation has been overlooked. • Proper installation is the responsibility of the homeowner. The importance of proper installation of your Dacor cooktop cannot be overemphasized.
Wiring Diagram B 120V, 60Hz, 0.
Notes 15
Notes 16
Dacor ● 14425 Clark Avenue, City of Industry, CA 91745 ● Phone: (800) 793-0093 ● Fax: (626) 403-3130 ● www.dacor.