User`s manual

2. Upgrading Memory and Changing the backup Battery
This section is to describe that upgrading memory and Changing t
h
backup battery.
Upgrading Memory
This model has 64 Mbytes memory as a default and you can upgrade ma
256 Mbytes when you need.
How to install
1) Locate the two clips that hold the memory module in place. One cli
holds the left edge of the module and the other clip holds the right edge
2) Push both clips away from the socket.
3) Position the DIMM over the socket so that the notch at the bottom of th
module lines up over the divider in the socket. As shown in the nex
picture, match the wide part of the module to the wide part of th
opening in the socket.
4) Push the module straight down into the socket.
Daewoo Telecom Lt
D I M M
Memory module
DIMM Socket
n o t c h e s
To insert DIMM module :
Position botton notches
over socket dividers
s h o w n
AIO(DAE) 0.3.30 3:39 PM ∆‰¿Ã¡ˆ17