User`s manual

3.Set Jumpers
Pin assignment
CMOS Clear(JP6)
To clear the CMOS Data :
1) Turn off your computer and plugged out your AC power cord from
wall socket
2) Close pins 2-3, wait five seconds and place the jumper back on pins
1
2(The jumper must be placed back on pins 1-2 for the system t
function properly)
3) Turn on your computer
Clear CMOS JP6
Normal 1-2
Clear 2-3
Disable On-board Audio(JP8)
This Jumper uses for Enable or Disable the on board audio subsystem.
Internal Audio J P 8
E n a b l e ( D e f a u l t ) 1 - 2
D i s a b l e 2 - 3
Enable Keyboard password power on function(JP7)
This jumper uses for Enable or Disable Keyboard Password power o
f u n c t i o n 7
K/B Password on JP8
Enable(Default) 1-2
Disable 2-3
Daewoo Telecom Lt
1 2 3
AIO(DAE) 0.3.30 3:40 PM ∆‰¿Ã¡ˆ31