User`s manual

-Installed O/S
Select the operating system installed on your system which you will u
s
most commonly.
(Note : An incorrecting setting can cause some operating systems t
display unexpected behavior. )
-Reset Configuration Data
To reset PnP data, set the value to ‘Yes’. ‘Yes’ erase all configuration dat
in ESCD, which stores the configuration settings for non-PnP plug-i
d e v i c e s .
Select ‘Yes’ when required to restore the manufacture’s defaults.
-PS/2 Mouse
This is to ‘Enable’ or to ‘Disable’ PS/2 Mouse functions.
‘Auto Detect’ will enable the PS/2 mouse only if present.
-Large Disk Access Mode
Select ‘DOS’ if you have DOS.
Select ‘Other’if you have another operating system such as UNIX.
A large disk is one that has more than 1024 cylinders, more than 16 heads
or more than 63 tracks per sector.
-Local Bus IDE adapter
Enable the integrated local bus IDE adapter.
Specifies an option from below.
• Disabled : Disable the Local Bus IDE adapter.
• Primary : Use only the primary Local Bus IDE.
• Secondary : Use only the Secondary Local Bus IDE.
• Both : Use both Local Bus IDE adapters.
Daewoo Telecom Lt
AIO(DAE) 0.3.30 3:40 PM ∆‰¿Ã¡ˆ37