User`s manual

: Resuming from the Suspend Mode
- By Pressing the Power switch, Keyboard, Mouse
- When the modem rings(when “Resume On Modem” is set to “On”)
- Accoring to the time set in the timer(When “Resume On Time” is set t
o
“ O n ” )
Save To Disk(When the Suspend Mode is set to “Save To Disk”)
Save system date into the hard disk and turn the system power off fo
maximum power saving.
:Entering into the Save To Disk Mode
- On the ‘Shutdown’ command by Wi n d o w s .
- By pressing the Power switch.
- Accoring to the time set in the timer(According to the value in
“Suspend” Wi n d o w s )
:Resuming from the Save To Disk Mode
- By Pressing the Power switch
- By Password when it was used at “Power Supply Control”
* On Wi n d o w s 9 8 / N T / Win2000, It is recommended that you follow th
normal closing procedure for the protection of the system.
* Power Saving mode is not supported in the OS environment wher
power management is not provided. Therefore, the “Save To Disk
mode is not supported when the system is booted either with DOS o
Windows NT4.0.
-Resume On Ti m e
According to the pre-set, the system recovers from the Suspend mode.
Enabled wakes the system up at a specific time.
-Resume Ti m e
Define the ‘Resume Time’ when ‘Resume On Time’ is set to ‘On’.
-Resume On Modem Ring
Enabled wakes the system up when an incoming call is detected on you
m o d e m .
Daewoo Telecom Lt
AIO(DAE) 0.3.30 3:40 PM ∆‰¿Ã¡ˆ43