Operation Manual

Selection of AV and
Multimedia Input Signal
32
HDMI & PC mode
1. For optimum picture quality, use 1280x720p computer or set top box output at a 60Hz refresh rate. Using
other formats or refresh rates may result in reduced picture quality.
2. If the message ‘No signal’ appears on the screen, adjust the PC output to a format listed in the Multimedia
Input table.
Multimedia Input Format
Resolution V-freq HDMI PC(D-Sub) Component Standard
60Hz O O X
640 X 480 72Hz O O X
75Hz O O X VESA Standard
60Hz O O X VESA Standard
800 X 600 72Hz O O X VESA Standard
75Hz O O X
60Hz O O X VESA Standard
1024 X 768 70Hz O O X VESA Standard
75Hz O O X VESA Standard
720 X 480 60Hz O X O
720 X 576 50Hz O X O
1280 X 720
50Hz O X O
60Hz O X O
1920 X 1080i
50Hz O X O
60Hz O X O
720 X 480i 60Hz X X O
720 X 576i 50Hz X X O
When connecting PC, STB, DVD with Multimedia
1. Pressing the "MULTIMEDIA" button on the remote controller.
• The screen changes as follows:
PC => HDMI => Component => PC
PC
Clock 12 : 00
COMPONENT
Clock 12 : 00
HDMI
Clock 12 : 00
MUTE
PICTURE
ASPECT
SOUND
POWER
RECALL
MULTIMEDIA
MENU
V
O
V
O
PR
Note : • 1280 X 720 mode is commonly used for Component.
• So if this mode is used at PC mode, the screen can be enlarged.