Service manual

8 9
HOW TO SET THE OVEN CONTROLS
Tips : ¡ Be sure to read the cookbook’s introduction before operating the oven.
¡ Also remember to read this operating instruction for proper safety information and instruction before using t
he oven.
¡ See the cookbook for specific recipes.
¡ Prior to setting the controls, place one cup of water in the oven, in a heat-proof glass measuring cup, for
testing purposes.
¡ When setting the controls, everytime a button is pressed, a beep can be heard.
CLOCK
SETTING THE CONTROL
TO STOP THE OVEN WHILE THE OVEN IS OPERATING
1. Press (STOP/CLEAR) button.
- You can restart the oven by pressing (START) button.
- Press once more to erase all instruction except clock.
2. Open the door
- You can restart the oven by closing the door and pressing button.
ERASING INSTRUCTIONS
ƒUPress (STOP/CLEAR) button to erase all instructions you set previously.
ƒUOpening the oven door during cooking dose not erase cooking instruction.
ƒUIf you press twice button during operation, the cooking instruction is all erased.
OPERATION
NOTE : Ovne stops operating when door is opened.
NOTE : ¡ When the oven is plugged in, “0:00” appears in the display window.
¡ The two dots between the hour and minutes are the clock indicator light. They will start to flash on and off.
¡ The time of day will be displayed at all times, except when the oven is operating.
¡ In the oven of a power failure or if the oven is unplugged, the clock will have to be reset for the proper
time. Once power is restored or oven is plugged in, the display will show “0:00”.
¡ To reset the time of day, repeat the steps given below.
¡ To check the time of day while the oven is operating, push the CLOCK button, then the time will
be displayed for 3 seconds.
¡ When you turn DIAL KNOB, minutes are increased by to turn right and hours are increased as
to turn left.
1. Press CLOCK button.
If you push the CLOCK button once
again, you can select 12 hour clock
system.
Then guide lamp will starts blinking.
2. Turn left the DIAL KNOB for hour
you want.
3. Turn right the DIAL KNOB for
minute you want
This example is 24 hour clock system.
NOTE : If you are not setting current time for 3 seconds, display return to old time.
NOTE : This oven is multiple
clock system.
NOTE :
• If you selected 12 hour clock
system, this digital clock
allows you to set from 1:00 to
12:59.
• If you selected 24 hour clock
system, this digital clock allows
you to set from 0:00 to 23:59.
•The colon will stop blinking.