Product information Contents Product Information DVD Operation Important Safeguards ................................................ 2 Advantages of This Product Are .... ....................... 5 Read Carefully before Using .................................... 6 Identification of Controls .......................................... 7 Remote Control ......................................................... 11 Playing a desired scene ...........................................
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Important Safeguards The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
13 LIGHTNING For added protection for this unit during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the unit due to lightning and power line surges. 14 DISC TRAY Keep your fingers well clear of the disc as it is closing. It may cause serious personal injury.
Cautions in use of DVD-Video player are described below. Please read carefully before using a DVD-Video player. ✔ Installation place and handling • When you place this player near other devices, they may affect poorly together. • When you place DVD-Video player and TV in the upper and lower sides, it may cause flickering of pictures or failure (tape is not ejected). • When you place this player near strong magnetic materials, it may affect image or voice poorly or damage recording.
Product information Identification of Controls Identification of Controls Main body (Rear Panel) Operation Display Window ! @ # % ^ & - RECORDING MODE Timer Recording Standby Timer Recording Error $ Recording in Progress ! POWER CORD It is a jack for supplying power to the unit. Timer Recording in Progress Connect to outlet in a wall.
Remote Control ! [DVD] OPEN/CLOSE button, [VCR] EJECT button @ VCR SELECT button Accessories Remote control # 2 Batteries Instruction Manual RF cable 9 0 “ ! @ • To purchase accessories or not supplied parts additionally, contact your nearest dealer or service center. But, instruction manual is not sold additionally. Instructions in using REMOTE • Operate remote control within 7m from the unit. • Do not press 2(two) buttons at the same time.
Connecting up your player with RF lead ■ Before you start, unplug all the equipment from the mains supply. ■ Before you start, unplug all the equipment from the mains supply.
Connecting with Other VCR or Camcorder How to Connect with Jack in Front Panel REAR PANEL OF PLAYBACK VCR(CAMCORDER) ™ £ (L) AUDIO (R) OUT REAR PANEL OF DVD-VIDEO ¡ ™ INPUT 1 INPUT 2 ANT IN £ ¢ ∞ RF CABLE How to Connect with Jack in Rear Panel REAR PANEL OF TV INPUT 1 INPUT 2 VIDEO Connect “ANT. IN” jack in TV to “TV” jack in DVD-Video with RF cable. To record contents of camcorder or playback video with DVD-Video, insert recording tape attached recording tab in DVD-Video.
Connecting with Audio How to Connect with Stereo Unit such as Audio Connecting to a television with Component jack and a Dolby Digital Amp. ■ Use in COMPONENT In jack attached in TV or amp supporting Dolby Digital. REAR PANEL OF DVD-VIDEO (L) AUDIO (R) ¡ ™ £ Installation REAR PANEL OF STEREO UNIT How to Connect REAR PANEL OF DVD-VIDEO CONNECTING CABLE Connect Audio jack. Connect AUDIO OUT in rear panel of DVD-Video to IN jack of stereo sound unit.
Initial Installation ■ Switch the TV on. ■ You can also start "AUTO SEARCH" in the SETUP "PR PRESET" ➝ "AUTO SEARCH". ■ To tune in new stations (manual tuning) and to enter station names see page 27-28. Setting up the player 5 CHECK IT! 1 2 3 LANGUAGE SET ENGLISH PYCCKNZ ÔESKY MAGYAR You should see this picture the first time you switch on the TV and player. PR+/-:SELECT OK:CONFIRM OK for "AUTO SEARCH!". "AUTO SEARCH" tunes in all the stations you can receive in your country.
Setting time and date Output Select Setting time and date To Select DVD ■ Press [VCR] button on the remote control to change into VCR Mode and follow the procedure below. Press [DVD] button. 1 Call the player’s "SETUP", choose "VCR SETUP", then "CLOCK SET". CLOCK SET TIME - - : - - If DVD mode is correctly selected, DVD on the operation display window is lit. Then, REMOTE button works as DVD function. Press the [DVD] button, then the mode of DVD-Video Player becomes to the OPERATION mode.
VCR Playback DVD Playback 1 2 4 5 6 ] button to power on. Press [DVD] button of REMOTE to change into DVD mode. Press [OPEN/CLOSE] button to open the disc tray. Place a disc firmly on the disc tray, making its label look upward. Insert the disc and press [OPEN/CLOSE] button to close the tray. The disc tray is closed and after checking the disc’s condition, Playback or Stop function starts to operate. To playback it, press [PLAY/PAUSE] button.
Recording Recording To Record With VCR 1 2 4 5 6 7 Insert a recordable tape. Insert a tape with recording tab. 1 2 3 With [CHANNEL], [NUMBER] and [INPUT] buttons, select the desired broadcasting channel or external input unit to record. Select the desired speed (SP or LP) with [SPEED] button. Press [REC] button. Then, it starts recording. If you want to pause recording, press [PAUSE] button.
Recording Tuning in New Stations One Touch timer Recording (OTR) ■ The TV and player are switched on. ■ To see the picture from your player, press the input or AV (Audio/Video) button on the TV. ■ When your urgent business happens suddenly in watching TV or you want to record the current TV program for the desired time, follow the procedures below. 1 2 Tuning First, follow the steps 1 to 4 in “Recording With VCR”. Press [REC] button as much as you want. See the “Recording Times Table” below.
Tuning in New Stations Tuning in New Stations Station names Sorting programme locations ■ If your player is showing no station name or is showing a station name incorrectly, you can correct this. If the location numbers used for programmes stored in your TV and player are different, you can change them on the player. To do this, move the stations to the right numbers, until they are arranged the way you want. 2 Select NAME position. Press the [0] button to change the given name.
Timer Recording Timer Recording ■ For timer recordings, clock, date, and stations must be set correctly. ■ Load a cassette with its safety tab in place and with sufficient free space for the recording. Normal timer recording Please decide and confirm with OK.
More Functions More Functions ■ The counter counts in real time from the point you load the cassette. This does not have to be its beginning! The counter does not count unrecorded parts of the tape. ■ If you rewind beyond the zero position, the counter counts in negative values (e.g. – 0:01:15). Resetting the counter to zero Reset the counter.
More Functions Connections and Assembling ■ The player machine records the complete sound signal transmitted by the TV station. ■ On the mono VCR, you will hear the normal mono sound. ■ If you are using a RCA cable, select the AV input on the TV to see the picture from the player. ■ If you are not using a RCA cable, select the button number on the TV reserved for video input to see the picture from the player.
Connections and Assembling Playing a desired scene To skip scenes in a disc Assembling Should you wish to assemble your own film, from camcorder footage for example, use the assembly technique for smooth edit points: • The symbol is lit in VCR mode and goes out in TV mode. To move to next chapter (or track), press [√√❚ NEXT] button. The current chapter (or track) moves to the next chapter (or track). Press [❚œœ PREV] button.
Playing desired scene Playing desired scene Searching DVD with a title number, chapter number or a time Repeating a defined period 1 Each time you press [REPEAT] button in playback mode, repeat playback starts as below.
Playing desired scene Confirming the current PLAYING TIME Searching VCD with a track number, disc time or track time 1 If you want to search wth a disc time, press [SEARCH] button one time. In case of PBC OFF, the screen like the right figure appears. Please enter the new time to be searched using the [NUMBER] button. PLAY starts from the selected position. Confirming the current playing time of DVD disc - -: - - DISC GO TO : It shows the current playing time.
Confirming the current PLAYING TIME Confirming the current playing time of VCD disc While in playing, press [DISPLAY] button. It shows the current playing time. Each time you press [DISPLAY] button in playback mode, DISPLAY is change as below. TRACK ELAPSED TRACK 01/20 0:00:57 Selecting an AUDIO language and SUBTITLE language Selecting an audio language ■ The user may select an audio language and subtitle language if a disc includes Multi-language.
Selecting ZOOM and Multi Angle About MP3 and JPG discs Using a zoom function Playing a disc containing MP3 files ■ The user can enlarge the current screen about 2 , 3 or 4 times. • During zoom mode, subtitle language can’t be seen. This unit will play MP3 files recorded on CD-R and CD-RW discs. Keep pressing [ZOOM] button till the preferred zoom appears. Every time the user presses [ZOOM] button, a zoom magnification changes 2 times (X2) ➝ 3 times (X3) ➝ 4 times (X4) ➝ OFF ➝ 2 times (X2) ➝ ...
About MP3 and JPG discs About MP3 and JPG discs Playing a disc containing JPG (PHOTO) files The ability of this unit to read MP3 discs is dependent on the followings: • The Bit Rate must be within 64-256 kbps. • The maximum number of directories should not exceed 32. • The maximum depth level of directories should not exceed 4. • In case that the file is recorded with the variable bit rate (VBR) in one file (Example: 54256kbps) the sound breaking may occur during the playback.
Displaying menus in a disc To display menus in a disc Language Setup ■ A user can set OSD language, Audio, Subtitle and Disc Menu. ■ If a disc includes menus, the user may use them. 1 Press [MENU] button. • In case of a DVD disc, it shows menus in the disc. Also they are different according to discs. • If it is a VCD2.0, select PBC ON mode by pressing [TITLE/PBC] button. “OSD” means “On Screen Display”. 1 While STOP or RESUME STOP, press [SETUP] button.
Language Setup Video Setup ■ A user can set up a connected TV condition and screen. 5 Selecting Disc Menu language. Set your preferred DISC MENU language with [ENTER]. If the DISC MENU language is set and recorded on the DISC, it is automatically played in the set language every time it is played.
Audio Setup Others Setup ■ A user may select audio menu according to a user’s speaker set. 1 While STOP or Resume STOP, press [SETUP] button. LANGUAGE DIGITAL OUT DYNAMIC RANGE BITSTREAM 1 While STOP or RESUME STOP, press [SETUP] button. VIDEO LANGUAGE OSD SCREEN SAVER DEFAULTS VIDEO PARENTAL PASSWORD AUDIO OTHERS AUDIO ENTER OTHERS ENTER 2 Select a Digital Output. Set audio output to coaxial.
Others Setup About DVD Playable Disc 6 Changing a password. To change your password, move the cursor to “PASSWORD” and press [√]. Then press the [ENTER] button. LANGUAGE OSD SCREEN SAVER DEFAULTS VIDEO PARENTAL CHANGE ✓ PASSWORD AUDIO • DVD, Video CD(Version 1.1, 2.0), S-VCD and Audio CD Disc type DVD Playable Possible Restriction Region number 2 or Region number All Video CD CD CD-ROM Possible Possible Possible Version 1.0/1.1/2.
About DVD This is recorded on a Video CD 2.0, Video CD 3.0 and SVCD. The scenes or information to be viewed (or listened to) can be selected interactively with the TV monitor by looking at the menu shown on the TV monitor. It stands for PlayBack Control. PBC CHAPTER It means the information recorded in a DVD. A title in a DVD is divided into many tracks, of which a track is called as a chapter. A certain scene of a screen can be quickly searched with the chapter number.
Trouble Shooting (VCR) Trouble Shooting (VCR) Symptom • “Power On” does not work. ➤ Please check whether a power plug is inserted in an electric outlet. • It does not work even in “Power On”. ➤ ➤ Please check whether a videotape is inserted in. Try to insert a plug again. • A videotape is not inputted in. ➤ ➤ ➤ Please check whether a power plug is inserted in an electric outlet. Please check whether a videotape is in.
Trouble Shooting (DVD) Symptom • The recorder does not play. Checks ➤ ➤ ➤ • No sound comes through. Specifications ➤ If a DVD is from overseas, it may not be played. Please check a DVD’s region code whether it has the relative region code 2 or All. Please check whether a DVD is inserted in a right direction. If it is a CD-ROM for PC or DVD-ROM, it does not work.
QUICK START GUIDE FOR SORTING CHANNELS ON THE DVD COMBO Once the ‘Auto Set’ function has been completed the On Screen Display will show a list of the channels which it has found, displayed in the order it found them. It is unlikely, that they will be in the correct oder ie. ARD as PR01, ZDF as PR02, P-03 as PR03, p-04 as PR04 and MTV as PR05. Therefore, it will be necessary to Sort the channels displayed, into the correct order. Please follow the following procedure.
INSTRUCTION MANUAL DVD PLAYER + VIDEO CASSETTE RECORDER SG-7200D ENGLISH Please read this manual carefully before connecting your DVD+VCR and operating it for the first time. Keep the manual in a safe place for future reference. P/N:97P95600D0- Downloaded From Disc-Player.
