Installation Instructions

WARNING:

If you are unsure of how to make

proper adjustments to your bicycle,

seek a qualified bicycle technician for

professional advice on adjustments.

The low-profile Dahon Neos derailleur was specially designed for small-wheeled bicycles. The

Neos allows much more ground clearance than a conventional derailleur. Using cache technology,

it permits the derailleur body to lie flat underneath the chain stays. This way the derailleur body only

projects 12mm from the chain stays and is much more protected than a standard derailleur, which

protrudes up to 40mm.

Due to its special design, the Dahon Neos

derailleur differs from that of a conventional

derailleur. The Neos is alligned in the opposite

direction (i.e. the adjustment screws and the

wire adjustment bolt are facing forward), but

you can adjust it like any other derailleur.

Please follow the instructions below.

Dahon Neos Derailleur

Conventional DerailleurDahon Neos Derailleur

Wire Fastening Bolt

High Adjustment Screw

Adjustment Screws

Wire Adjustment Bolt

Low Adjustment Screw Wire Tension

Adjustment Bolt