Installation manual

SPEED ADAPTER PART NUMBERS
SEN-2011: The cable adapter accepts a 5/8” thread fitting and can be mounted in a concealed location.
Cycles that have a metric-threaded speedometer cable will need to have the cable modified or replaced.
SEN-2012: The adapter harness for using a stock transmission speed sensor converts the triangular
connector to the in-line connector on the speed/tach system. 18” length for speed connectors located by the
speedometer.
SEN-2013: The adapter harness for using a stock transmission speed sensor converts the triangular
connector to the in-line connector on the speed/tach system. 36” length for speed connectors located under the
seat.
SEN-2018: The rear wheel sensor kit consists of a sensor mounted to the rear wheel spacer and a harness
to connect it to the digital speedometer. The sensor reads the hub bolts. It will work with most softail® and rigid
applications.
SEN-2019: The gear-tooth sensor kit consists of a two-terminal sensor and a harness to connect it to the
speed/tach system. The sensor needs to be mounted within 1/8” of the teeth on a steel final drive gear.
WARRANTY
All DAKOTA DIGITAL instruments are warranted free of defects in material and workmanship for 2
years from the date of purchase. In the event of a problem with one of our products within the warranty period,
DAKOTA DIGITAL will replace or repair the instrument at no charge. (The decision to repair or replace is solely
that of DAKOTA DIGITAL. DAKOTA DIGITAL is not responsible for shipping costs of products returned under
warranty or for labor charges for product installation and removal.) This warranty becomes invalid if the product
is misused, altered or installed incorrectly.
For warranty coverage, you must first call to receive an RMA#. Ship the product transportation
prepaid via UPS or insured Parcel Post. A copy of the original invoice or dated bill of sale along with a
description of the defect is also required. Make sure that the RMA number is clearly visible on the outside of the
package as well as inside on the paper work.
The above warranties, both expressed and implied, do not cover damages caused by improper
installation, misuse, abuse, fire, unauthorized modifications, floods or acts of God, or reimbursement of
customer or shop time. The extent of the warranty is limited only to the product and does not cover any loss or
damage to vehicle, equipment, or non-DAKOTA DIGITAL products.
SERVICE AND REPAIR
DAKOTA DIGITAL offers complete service and repair of its product line. In addition, technical
consultation is available to help you work through any questions or problems you may be having installing one
of our units. You can contact our technicians at 605-332-6513 or by email at [e-mail].
Should you ever need to send the unit back for repairs, please package the product in a good quality
box along with plenty of packing material. Ship the product by UPS or insured Parcel Post. Be sure to include
your RMA#, a complete description of the problem, your full name and address (street address preferred), and a
telephone number where you can be reached during the day. A return authorization number (RMA#) for
products being return for repair is required. Do not send any money. We will bill you for the repair charges.
4510 W. 61ST St. N., Sioux Falls, SD 57107
Phone: [phone] FAX: [phone]
www.dakotadigital.com
[e-mail]
©Copyright 2004 Dakota Digital Inc.
8