User Manual

ManualsBrandsDakota Digital ManualsAutomotiveDakota Digital 95-98 Chevy GM Full Size Pickup Truck Analog Gauge Kit Silver Alloy Red VHX-95C-PU-S-R

Manual # 650602B

VHX-95C-PU

Dakota Digital VHX Instrument Installation

For 1995-‘98 Chevrolet/GMC Full-Size Pickup

1995-’00 SUV & HD Pickup

Your new VHX-95C-PU kit includes:

Installation

Control Box

CAT5 Cable

Universal Sender Pack

Installation Manuals

VHX Display

(4x) 1” Screws

1. The first step is to remove the stock

gauge cluster from the dash.

Alternator Load Harness

Switch Assembly

Summary of content (4 pages)

PAGE 1
VHX-95C-PU Dakota Digital VHX Instrument Installation For 1995-‘98 Chevrolet/GMC Full-Size Pickup 1995-’00 SUV & HD Pickup Your new VHX-95C-PU kit includes: VHX Display Alternator Load Harness Universal Sender Pack Installation Manuals (4x) 1” Screws Control Box Switch Assembly CAT5 Cable Installation 1. The first step is to remove the stock gauge cluster from the dash.
PAGE 2
1a. First, park on level ground and put blocks in front of and behind the tires and/or engage E-brake to secure the vehicle from rolling. Remove the front plastic face by dropping the tilt steering all the way to the bottom and pulling the gear shift lever into drive while making sure the vehicle will not roll. If no tilt, loosen the 15mm nuts to drop the column.
PAGE 3
. Attach the provided CAT5 Cable to the back of the VHX display. Carefully route the other end to the control box mounting location making sure the cable will not get pinched. 4. Mount the VHX cluster to the dash using the provided four (4) 1” screws in the existing mounting holes.
PAGE 4
5. Refer to the main manual for wiring instructions and re-install the dash in reverse order to complete the VHX installation. 6. Stock style alternators will need an additional wiring connection at the gauge cluster connecter to excite charging. You will need to add resistance from the Pink wire in the A22 location to the Brown wire in the A19 location. The range needed is 500-30 ohms, three 1/4W 1K resistors in parallel will be in range at 333 ohms.