Specification Sheet

ACCESSORIES
For best results and warranty compliance, use of approved underlayment and grout
are required. Available wherever RevoTile is sold. See installation instructions for more
information.
SIZES
Grout
Joint
Thickness
Sq. Ft./
Carton
Pieces/
Carton
6 x 24
Floor Tile
(6-1/16" x 23-7/8")
(15.40 cm x 60.60 cm)
3/16" 15/32" 9.43 10
12 x 24
Floor Tile
ç
(11-13/16" x 23-13/16")
(30.00 cm x 60.48 cm)
1/8" 15/32" 9.65 5
Wood Look |
ç
Marble & Stone Look
7834 C.F. Hawn Freeway
Dallas, Texas 75217 | 1.800.933.TILE
To view the complete collection of
Daltile
®
products and information,
visit our website at daltile.com. ©2019 Daltile (10/19)
APPLICATIONS
Target
DCOF wet
Suitable
Dry & Level – Interior Floor N/A
Wet & Level – Interior Floor ≥ 0.42
Shower Floors (Residential or Light Commercial) ≥ 0.42
Exterior Floor Applications
(including pool decking & other
wet areas with minimal footwear)
≥ 0.60
Ramps & Inclines ≥ 0.65
Walls/Backsplashes N/A
Countertops N/A
Pool Linings N/A
A DCOF value of ≥0.42 is the standard for tiles specified for level interior spaces
expected to be walked upon when wet, as stated in ANSI A137.1-A326.3. For more
information about DCOF and the DCOF AcuTest
, visit daltile.com/DCOF.
INSTALLATION
Pattern Recommendation* Shade Variation
Floor 6 x 24: 33% Offset / 50% Offset
Floor 12 x 24: 33% Offset / 50% Offset
High (V3)
* Straight grid installation is not approved for RevoTile.
PERFORMANCE CHARACTERISTICS
ASTM# Result
Water Absorption C373 < 0.5%
Breaking Strength C648 > 475 lbs
Scratch Hardness MOHS 8.0
Chemical Resistance C650 Resistant
Abrasion Resistance C1027 4
RevoTile features greater breaking strength and impact resistance
than conventional porcelain tile.
For additional information on test results, visit us at:
daltile.com/information/TestResults.
(RV61, RV70, RV71, RV72, RV73, RV74 is 3)
NOTES
Since there are variations in all fired ceramic and natural products,
tile and trim supplied for your particular installation may not match
samples. Final confirmation should be made from actual tiles and
trim prior to installation. Manufactured in accordance with ANSI A137.1
standards.
Not for use on ramps. Water, oil, grease, improper drainage and
certain footwear can create slippery conditions. Floor applications
expected to be exposed to these conditions require extra caution in
product selection.
For additional information refer to “Factors to Consider” at:
daltile.com/Factors.
Special consideration needs to be given when installing tiles greater
than 15 inches. Please refer to daltile.com/LargeTiles for more
information.
For more information, visit daltile.com.
MADE IN THE U.S.A.
*
REVEAL IMAGING
®
All or select items within this series meet the requirements for these
qualifications. For more information, visit daltile.com.
* Made in the USA with imported material.
For warranty details,
visit daltile.com.

Summary of content (2 pages)