Collection Specifications

FABRIQUE
™
COLORBODY
TM
PORCELAIN
floor • wall • countertop
FABRIQUE
™
COLORBODY
TM
PORCELAIN
Fabrique combines the detail of fine fabrics with porcelain
flooring that creates an atmosphere as rich and intricate
as handcrafted linen. Taking cues from different textures
and colors, the Fabrique collection draws inspiration from
the way fabric moves and allows you to bring a delicate
elegance to any space.
FABRIQUE
™
COLORBODY
TM
PORCELAIN
©2009 Dal-Tile Corporation (11/09) SSPTSFAB09
SIZES
NOMINAL ACTUAL
SQ.FT.
CARTON
PIECES PER
CARTON
24" x 24" Field Tile
(Unpolished)
23-9/16" x 23-9/16"
(59.8 cm x 59.8 cm)
15.49 4
12” x 24” Field Tile
(Light Polished & Unpolished)
11-3/4" x 23-9/16"
(29.8 cm x 59.8 cm)
15.49 8
12” x 12” Field Tile
(Unpolished)
11-3/4" x 11-3/4"
(29.8 cm x 29.8 cm)
10.65 11
2” x 2” Mosaic
(Unpolished)
11-3/4” x 11-3/4”
(29.8 cm x 29.8 cm)
(Mesh-mounted on
12” x 12” sheet)
10.65 11
COMMERCIAL
COMMERCIAL APPLICATION
LIGHT
COMMERCIAL COMMERCIAL
COMMERCIAL
EXTERIORS
Floors**
◆ ◆
Walls/Backsplashes
◆ ◆ ◆
Counters
◆ ◆ ◆
Pool Decking
Pool Linings
◆ ◆ ◆
Suitable for exterior walls in freezing and non-freezing climates when proper installation
methods are followed.
**Unpolished only
RESIDENTIAL
RESIDENTIAL USAGE
FLOOR WALL COUNTERTOPS EXTERIOR
PATIOS
EXTERIOR
POOL DECKS
F W C EP ED
7834 C. F. Hawn Freeway | Dallas, TX 75217 | 214.398.1411 800.933.TILE
For more information about Daltile products and services, visit our website at daltileproducts.com
LINEAR OPTIONS
™
SIZES*
NOMINAL ACTUAL
SQ.FT.
CARTON
PIECES PER
CARTON
6" x 24" Field Tile
6" x 24"
(14.63 cm x 59.8 cm)
10.65 11
4” x 24” Field Tile
4" x 24"
(9.73 cm x 59.8 cm)
6.46 10
2” x 24” Field Tile
2" x 24"
(4.67 cm x 59.8 cm)
6.66 20
* Additional linear and rectangular sizes available through Linear Options
™
, Daltile’s linear
cutting service. Visit www.daltileproducts.com/linearoptions for sizes and order information.
Cert no. SW-COC-001883
Printed using soy inks.
TRIM
TYPE SIZE
PIECES
PER CARTON
Bullnose*
S-43C9
(Light Polished
& Unpolished)
3" x 12" 33
* Bullnose also available in horizontal design in Light Polished
& Unpolished in all colors via Special Order.
INSTALLATION
THICKNESS GROUT JOINT RECOMMENDATION
3/8"
1/8” (3/16" when rectangular sizes are used
in a staggered brick-joint pattern, where the
overlap does not exceed 33%)
TEST RESULTS
ASTM# RESULTS
Water Absorption C373 < 0.5%
Breaking Strength C648 > 450 lbs
Scratch Hardness MOHS 8.0
Chemical Resistance C650 Resistant
Coefficient of Friction
(Unpolished)
C1028
Wet: ≥ 0.60
Dry: ≥ 0.70
Coefficient of Friction
(Light Polished)
C1028
Wet: ≥ 0.50
Dry: ≥ 0.70
NOTES
Special care should be taken when grouting with dark pigmented colors. A grout
release is recommended to prevent finely powdered pigments from lodging in
the pores of the surface. Use of a latex modified thin-set is recommended for
installation.
Since there are variations in all fired ceramic products, tile and trim supplied for
your particular installation may not match these samples. Final color selection
should be made from actual tiles and trim and not from tile and trim samples or
color reproductions. Manufactured in accordance with ANSI A 1371.1 standards.
For additional information, refer to “Factors to Consider” at www.daltile.com/
CommercialFactors.
Water, oil, grease, etc. create slippery conditions. Floor applications with
exposure to these conditions require extra caution in product selection. Not for
use on ramps.
SHADE VARIATION
MEDIUM (V2)
Color variation within each tile.
SLIP RESISTANCE (WET) : 2 & 3
The higher the rating, the higher the slip resistance.
1 < .50
2
.50 - .59 (Light Polished)
3
≥ .60 (Unpolished)