Installation Guide

Photo features Restore™
Black Marble 2 in. x 2 in. Mosaic Tile
Installation of
MOSAIC TILE
INSTALLATION INSTRUCTIONS | MOSAIC TILE | PAGE 2 OF 6
CONTINUED ON NEXT PAGE
STEP 2: WALL LAYOUT
2
STEP 3: CUTTING
3
• It is recommended to use a diamond
blade, as blades designed for ceramic
tile will chip the stone and or glass.
NOTE: Cut edges should be placed in
corners where they can be hidden.
• Start by measuring the square
footage of the wall you are planning
to tile, making sure to take into
account any switches and outlets.
• Find the center point of the wall, using
a level to draw a plumb line in the
wall’s center.
• Lay out a row of loose tiles across the
bottom of the wall from the center line
leaving uniform joints between tiles.
• Once you have this initial row of loose
tiles laid out, measure to determine
what cuts need to be made so that all
tiles t into the working area.
NOTE: Tiles can be butted together leaving
a consistent 1/16 in. joint automatically.