SDS
09/24/2018Revision:
09/24/2018Printed:
Page: 4
Damp Rid Moisture Absorbers
SAFETY DATA SHEET
09/13/2018Supersedes Revision:
6. ACCIDENTAL RELEASE MEASURES
Wear appropriate protective gear for the situation. Prevent skin and eye contact.
For dry spills, place material in covered, clean dry container for disposal.
Steps To Be Taken In Case
Material Is Released Or
Spilled:
7. HANDLING AND STORAGE
Observe all federal, state and local regulations when storing this product.
Precautions To Be Taken in
Handling:
Keep in clean tightly closed dry containers. Store away from incompatible materials.
Precautions To Be Taken in
Storing:
None.
Other Precautions:
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
OSHA TWA ACGIH TWACAS # Partial Chemical Name Other Limits
No data. No data.
10043-52-4 Calcium chloride
No data.
No data. No data.
7647-14-5 Sodium chloride
No data.
No data. No data.
7447-40-7 Potassium chloride
No data.
Use of a NIOSH approved respirator should be based on contamination levels in the
workplace or situation. When warranted, use a face mask particulate respirator with a
NIOSH N95 rating.
Respiratory Equipment
(Specify Type):
Wear safety glasses with splash shields or safety goggles/shield.
Eye Protection:
Wear appropriate protective gloves to prevent skin contact.
Protective Gloves:
Wear appropriate protective (impervious) clothing and equipment.
Other Protective Clothing:
Provide local exhaust ventilation.
Engineering Controls
(Ventilation etc.):
A source of clean water should be available in the work area for flushing of the eyes and
skin.
Wash hands thoroughly after use.
Do not eat, drink, or smoke in the work area.
Before reuse, thoroughly clean any clothing or protective equipment that has been
contaminated by prior use. Discard any clothing or other protective equipment that
cannot be decontaminated, such as gloves or shoes.
Work/Hygienic/Maintenance
Practices:
9. PHYSICAL AND CHEMICAL PROPERTIES
Physical States:
[ ] Gas [ ] Liquid [ X ] Solid
Melting Point:
369.00 F - 1420.00 F
Boiling Point:
350.00 F - 3500.00 F
Autoignition Pt:
No data.
Flash Pt:
No data.
Explosive Limits:
LEL: No data. UEL: No data.
Specific Gravity (Water = 1):
2.15 at 77.0 F
Density:
15.4 LB/GL at 22.0 C
Odorless, white to off-white pellets or flakes.
Appearance and Odor:
Licensed to W.M. Barr and Company: MIRS MSDS, (c) A V Systems, Inc.
GHS format