Install Instructions

Instructions 013G8072

RAV to RA2000 Operator Adapter

VIUHB122 © Danfoss 05/07

Installation:

RAV to RA 2000:

In order to use current RA 2000 operators on existing systems with Danfoss RAV valves, the

adapter 013G8072 must be installed to allow the new operator to t onto the valve.

The Danfoss RAV operator is distinguished by the metal

band connecting the operator to the valve.

Metal Band

1. With a at head screw driver loosen the

screw of the metal band at the base of the RAV

operator to remove the thermostatic operator

from the valve body.

Allen Screw

Crossover Replacement Operator Guide, RAV to RA2000

013U8200 RAV

013U1100 RAVN

013G8072

Adapter

Built-in dial and

sensor

013G8250

Tamper resistant

Built-in dial and

sensor

013G8240

013U8202 RAV

013U1102 RAVN

013G8072

Adapter

Built-in dial and

remote sensor

013G8252

Tamper resistant

Built-in dial with

remote sensor

013G2922

If replacing RAV valve mounted operator with an RA 2000 “Wall Mount” operator (013G8562,

013G8565, 013G8568 or 013G8564) this adapter IS NOT REQUIRED.

PAGE 1
Instructions 013G8072 RAV to RA2000 Operator Adapter RAV to RA 2000: In order to use current RA 2000 operators on existing systems with Danfoss RAV valves, the adapter 013G8072 must be installed to allow the new operator to fit onto the valve. The Danfoss RAV operator is distinguished by the metal band connecting the operator to the valve.
PAGE 2
Instructions 013G8072 RAV to RA2000 Operator Adapter Installation (Cont.): Allen Screw 3. Place adapter over the valve’s shoulder as shown. 4. Complete the mounting of the adapter and tighten the Allen screw. 013G8250 013G8252 5a. For 013G8250 & 013G8252 Align the base of the RA2000 operator with the notches on the adapter. Press firmly until an audible “click” is heard. 013G8240 013G2922 5b.