Install Instructions

Instructions 013G8072
RAV to RA2000 Operator Adapter
Danfoss can accept no responsibility for possible errors in printed materials and reserves the right to alter its products without notice.
All trademarks in this material are property of the respective companies. Danfoss and Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.
Danfoss Inc.
Heating Division
7941 Corporate Drive
Baltimore, MD 21236 USA
Tel.: [phone], Fax: [phone]
www.na.heating.danfoss.com
Danfoss Inc.
Heating Division
6711 Mississauga Road, Suite 410
Mississauga, ON, L5N 2W3
Tel.: [phone], Fax: [phone]
www.na.heating.danfoss.com
VIUHB122 © Danfoss 05/07
3. Place adapter over the valve’s shoulder as
shown.
4. Complete the mounting of the adapter and
tighten the Allen screw.
5a. For 013G8250 & 013G8252
Align the base of the RA2000 operator with the
notches on the adapter. Press rmly until an
audible “click” is heard.
5b. For 013G8240 & 013G2922
For tamper resistant operators 013G2922 and
013G8240 the Allen screw on the operator
must be tightened to secure to the valve.
Installation (Cont.):
Allen Screw
013G8250
013G8252
013G8240
013G2922
Operation
Instructions:
For complete details of the installation of the operator, please consult instructions enclosed with
applicable operator.