Datasheet

Choose the right sensor
The thermostatic sensor should be selected on
the basis of the following criteria:
The thermostat must always be able to register
the temperature of the ambient air.
Radiator thermostats with built-in sensors
These should always be tted horizontally so that
the ambient air can pass freely over the sensor.
Danfoss does not recommend the tting of a
built-in sensor in vertical position because heat
eect from the valve body and possibly surface
pipes will cause incorrect operation of the
thermostat.
Radiator thermostats with remote sensor
These should be used when:
- Curtains cover the thermostat
- Thermostat is aected by surface pipes
- Thermostat is aected by draught
- It is necessary to mount the thermostat
in vertical position if there are adjacent
obstructions.
The remote sensor must be mounted on the
wall, away from curtains, or on the skirting board
beneath the radiator if free of surface pipes.
All remote sensors are now supplied with ultra-
thin capillary tube. Simply pull out the length
required (2 m maximum) and x
using clips provided or a special tacker gun.
0-2m
Datasheet
5
Danfoss React™ Thermostatic sensors series
© Danfoss Climate Solutions | 01.2023 | AI419743092720en-000101