Install Instructions

ManualsBrandsDanfoss ManualsHVAC SuppliesMBS 3300 Pressure Transmitter (0 to 145.04 PSI)

-5 –>+ 5% FS

-5 – >+20% FS

10 Nm

Installation Guide

Pressure Transmitters

MBS 32, MBS 32R, MBS 33, MBS 33M, MBS 2000, MBS 2050, MBS 2100, MBS 2150, MBS 2200,

MBS 2250, MBS 3000, MBS 3050, MBS 3100, MBS 3150, MBS 3200, MBS 3250, MBS 3300,

MBS 3350, MBS 4003, MBS 4010, MBS 4050, MBS 4510

060R9 328

Elektrisk tilslutning: Se produktskilt

Electrical connection: See product label

Elektrischer Anschluss: Siehe Produktschild

Raccordement électrique: Voir étiquette du produit

Conexión eléctrica: Ver la pegatina en el producto

Connessione elettrica: Vedi etichetta sulla confezione

EN 175301-803 2m screened

cable

AMP

econoseal,

J series, male

AMP superseal

1.5 series (male)

Deutsch

DT04-3P

Deutsch

DT04-4P

EN60497-5-2

M12 X 1

(4 pin)

Amphenol

6 pin

Universal

Mate-N-Lock

Deutsch

DT06-2S

AMP 173065

(wire)

ITT Cannon sure

seal ss 2-P

Lumberg

RSF 20 / 11

KET-2P

MG651092

Round

Packard

ISO

15170-A1-

3.2-Sn

IEC 947-5-2-M12 × 1 (5 pin)

Pin5: Forbundet til kapsling

Pin 5: Connected to enclosure

Pin 5: Anschluss an Gehäuse

Broche 5: Connecté au boîtier

Pin 5: Conectado a la cubierta

Polo 5: Collegato al corpo

MBS 32, MBS 32R, MBS 33, MBS 33M,

MBS 2000, MBS 2100, MBS 2200, MBS 3000,

MBS 3100, MBS 3200, MBS 3300, MBS 4003

MBS 2050, MBS 2150, MBS 2250,

MBS 3050, MBS 3150, MBS 3250,

MBS 3350, MBS 4050

MBS 4010, MBS 4510

MBS 2100, MBS 2150, MBS 3300, MBS 3350

MBS 4510

Zero adjustment

0–1 0–10 bar -5 +20% FS

0–16 0–40 bar -5 +10% FS

0–60 0–600 bar -5 +2.5% FS

Span adjustment

-5 +5% FS

Summary of content (2 pages)

PAGE 1
Installation Guide Pressure Transmitters Elektrisk tilslutning: Electrical connection: Elektrischer Anschluss: Raccordement électrique: Conexión eléctrica: Connessione elettrica: EN 175301-803 2m screened cable Se produktskilt See product label Siehe Produktschild Voir étiquette du produit Ver la pegatina en el producto Vedi etichetta sulla confezione AMP econoseal, J series, male AMP superseal 1.
PAGE 2
Australian approvals: According to N1297. American and Canadian approvals: 1. Temperature indicating and regulating equipment acc. to UL 873, file no E31024 and Process control equipment acc. to CSA std. C22.2 no. 142-M1987. 2. Class I, Div. 2, Group A, B, C and D acc. to UL 1604, file no E227388 and Non-incendive electrial equipment for use in class I, Division 2, Group A, B, C and D acc. to CSA std. no. C22.2 no. 213-M1987. Must be powered by Class 2 power supply when used in Haz. Loc. Class I, Div.