Brochure

www.LX.Danfoss.com
Please fax/email orders to:
416-352-5981/[e-mail]
For technical assistance call:
Toll Free: 866-676-8062
19
Simplify your installation with the GFEP Panels. Danfoss GFEP panels have built-in
ground fault equipment protection, minimizing the risk of faults and eliminating
extra wiring installation steps and costs. The panel can be activated by a Danfoss GX
850 ACP, DS controller or any other type of controller.
• Easy to install
• NEMA 1, UL listed enclosure
• Integrated 30mA GFEP (Optional)
• A LED trip indicator (internal)
• A LED heat on indicator
• Pre-wired terminal connections
• 120V on/off remote heat indicator
• Two year warranty
Technical Data GFEP Panels
Power Voltage Range: 208V - 600V
Max. Heating Load: 100A/200A
Control Voltage: 120V
Enclosure Type: NEMA1
Mounting: Wall mounted, indoors
Dimensions (H x W x D) 12” x 12” x 6” (305mm x 305mm x 152mm)
16” x 16” x 6” (406mm x 406mm x 152mm)
GFEP: 30mA trip
Danfoss GX
Electric Snow Melting
Electric Snow Melting Panels
GFEP (Ground Fault Equipment Protection) Contactor Panels
The Danfoss Contactor and Timer panels are primarily designed for snow and ice
melting applications. All panels are pre-wired and UL listed complete with a NEMA 1
enclosure, wiring diagram, terminal connection block, timer (timer panels), and two
or four 3-pole contactors. Timer panels can be used stand alone or in conjunction
with an automatic controller. Contactor panels must be used in conjunction with an
automatic controller.
• Low Cost
• Easy to install
• NEMA 1, UL listed panel box
• Heat on indicator light
• Pre-wired terminal connections
• Two year warranty
Technical Data Contactor / Timer Panels
Power Voltage Range: 208V - 600V
Max. Heating Load: 100A/200A
Control Voltage: 120V
Enclosure Type: NEMA 1
Mounting: Wall mounted, indoors
Dimensions (H x W x D): 10” x 10” x 4” (254mm x 254mm x 102mm)
12” x 12” x 6” (305mm x 305mm x 152mm)
Timer Override: 4 Hours
Contactor & Timer Panels