Installation Manual

It is important to plan the cable layout before any installation begins. Making a drawing of the roof
and then chalking the cable locations on the roof surface may be helpful. Remember to always
exercise caution when on a ladder or roof. See Appendix A to determine cable lengths required.
1. Choose your start point:
To protect the cable from damage and to ensure personal safety, do not start the cable
layout close to doorways, entrance areas or sidewalks etc.
Your starting point may already be determined depending on the location of the
electric supply outlet.
2. Roof Pattern:
Different cable patterns exist for different areas of the roof. Not always will all areas
need to be heated in your particular situation. Follow the instructions and illustrations
for each area requiring heating.
Cable Installation
Figure 1. Illustration of roof
5
TEL: [phone]. FAX: [phone]
Copyright 2009 Danfoss Inc.
088L3371- 07/2009