Installation Manual

Thank you for choosing the Danfoss RX Roof and Gutter De-Icing Kit as the solution to your roof
snow and ice problems. Danfoss is the world leader in electric radiant heating and the RX product
has been designed to produce an effective and constant solution to protect your roof from ice dams
and the related hazards. The quality engineered RX heating cables provide a safe, flexible and
economical solution to your snow and ice protection requirements.
High quality materials and workmanship ensure that Danfoss RX heating cables will bring years of
maintenance free service. Consequently, Danfoss RX is backed by a 2 year comprehensive
warranty.
If you have any questions or concerns during installation, don't hesitate to contact your local
Danfoss Representative or Danfoss Technical Support directly toll-free: 1-866-676-8062.
Don't forget to place the warning labels in the appropriate area.
Danfoss RX Roof and Gutter De-Icing Cables
THIS RX KIT CONTAINS:
1) Heating Cable
2) Shingle Clips
3) Warning Labels
The installer of the Danfoss RX heating cables should be familiar with installation methods outlined
in this guide, as well as electrical wiring conventions. The required outdoor power receptacle
should be installed by a professional electrician. National and local electric codes must be adhered
to, and inspection may be required during or after installation of the Danfoss RX cables.
Skill Level
1. RX Cable Kit
2. Tape measure to determine cable length estimate
3. Ladder to access the roof and gutters
4. Putty knife to lift shingles
5. Marking chalk to make cable location/pattern on shingles
6. File to remove sharp edges from gutters and downspouts to protect the cable
Required Tools and Materials
4) 6 ft power lead
6) Instruction Manual
5) Spacer Clips
2
TEL: [phone]. FAX: [phone]
Copyright 2009 Danfoss Inc.
088L3371- 07/2009