User manual

Caution Check installed fuses before making any settings.

Power

steps

Heating power in kW Control panel (single phase 1-N) fuse size

(A)

Control panel (three phase 3-N) fuse size (A)

1 3, immersion heater only 16 10

2 6, immersion heater only 30 16

3 9, immersion heater only 40 16

4 12, immersion heater only — 20

5 15, immersion heater only — 25

+4 12, immersion heater + com-

pressor

— 25

+5 15, immersion heater + com-

pressor

— 25

230V 1-N Electric auxiliary heater

The following settings are made in the Service Menu. If not already in the Service Menu, enter the Service Menu by pressing and holding

left (<) arrow for at least 5 seconds. Use + or – to move up and down in the menu.

Electric auxiliary heater for 230V, 1-N. Step 3 is highest setting

Setting of electric auxiliary heater for 230V, 1-N. Max step 3 in the SERVICE menu:

SERVICE

AUX. HEATER.

MAX STEP

Select max step

400V 3-N Electric auxiliary heater

The following settings are made in the Service Menu. If not already in the Service Menu, enter the Service Menu by pressing and holding

left (<) arrow for at least 5 seconds. Use + or – to move up and down in the menu.

Electric auxiliary heater for 400V, 3-N. Step 5 is highest setting

5 is highest setting

Setting of electric auxiliary heater for 400V, 3-N. Max step 5 in the SERVICE menu:

SERVICE

AUX. HEATER.

MAX STEP

Select max step

Commissioning

VIGFH102 Danfoss Heating Solutions