Operating instructions

5.3.13. Class ID 28 Motor Data Object

In this object, the current motor data can be configured and read out. The Instances, attributes

and services supported for this class are listed below.

5.3.14. Class ID 0/28 Motor Data Object

Attrib-

ute

Access Name Data

type

Generic

maximum

values

Units Default Description Parameter

reference

3 Get/set Motor

type

USINT 7 7 7 = Squirrel Cage Induction Motor 1-11

6 Get/set Rated

current

UNIT 0-100.00 100mA Drive dependent Stator Current rating (from motor

nameplate)

1-24

7 Get/set Rated

voltage

UNIT 200-500 volt Drive dependent Base Voltage rating (from motor

nameplate)

1-22

8 Get/set Rated

power

UDINT 0-18500 Watt Drive dependent Power rating at rated frequency

(from motor nameplate)

1-20

9 Get/set Rated

frequen-

UNIT 1-1000 Hz Drive dependent Elec. frequency rating (from motor

nameplate)

1-23

12 Get/set Pole

count

UINT Drive dependent Number of poles in the motor 1-39

15 Get/set Base

speed

UNIT 100-60000 RPM Drive dependent Nominal motor speed (from motor

nameplate)

1-25

FC 100/ 200/ 300 DeviceNet 5. How to Access the Parameters

MG.33.D3.02 - VLT

is a registered Danfoss trademark