Operating instructions

NB!
This parameter is active only when par. 8-01
Con-
trol Site
is set to [0] Digital and control word .
8-52 DC Brake Select
Option: Function:
Select control of the DC brake via the terminals (digital input)
and/or via the fieldbus.
[0] Digital input
[1] Bus
[2] Logic AND
[3]
*
Logic OR
NB!
This parameter is active only when par. 8-01
Control Site is set to [0] Digital and
control word
.
8-53 Start Select
Option: Function:
Select control of the frequency converter start function via the
terminals (digital input) and/or via the fieldbus.
[0] Digital input
[1] Bus Activates Start command via the serial communication port or
fieldbus option.
[2] Logic AND Activates Start command via the fieldbus/serial communication
port, AND additionally via one of the digital inputs.
[3]
*
Logic OR Activates Start command via the fieldbus/serial communication
port OR via one of the digital inputs.
NB!
This parameter is active only when par. 8-01
Control Site is set to [0] Digital and
control word
.
8-54 Reversing Select
Option: Function:
[0] Digital input
[1] Bus
[2] Logic AND
[3]
*
Logic OR Select control of the frequency converter reverse function via
the terminals (digital input) and/or via the fieldbus.
Select
Bus [1], to activate the Reverse command via the serial
communication port or fieldbus option.
6. Parameters FC 100/ 200/ 300 DeviceNet
56 MG.33.D3.02 - VLT
®
is a registered Danfoss trademark
6