Operating instructions

6.2. Parameter List
Par.
No. #
Parameter description Default value Range Conversion
index
Data type
8-00 Enabled Options All [1] [0 - 7] - 5
8-01 Control Site Dig. & ctrl. word [0] [0 - 2] - 5
8-02 Control Word Source FC RS485 [0] [0 - 4] - 5
8-03 Control Word Timeout Time 1s 0.1-18000 -1 7
8-04 Control Word Timeout Function Off [0] [0 - 10] -1 5
8-05 End ofTimeout Function Hold set-up [0] [0 - 1] - 5
8-06 Reset Control Word Timeout Do not reset [0] [0 - 1] - 5
8-07 Diagnosis Trigger Disable [0] [0 - 3] - 5
8-10 Control Word Profile FC profile [0] [0 - x] - 5
8-50 Coasting Select Logic OR [3] [0 - 3] - 5
8-51 Quick Stop Select Logic OR [3] [0 - 3] - 5
8-52 DC Brake Select Logic OR [3] [0 - 3] - 5
8-53 Start Select Logic OR [3] [0 - 3] - 5
8-54 Reversing Select Logic OR [3] [0 - 3] - 5
8-55 Set-up Select Logic OR [3] [0 - 3] - 5
8-56 Preset Reference Select Logic OR [3] [0 - 3] - 5
8-90 Bus Jog 1 Speed 100 rpm 0 - par. 4-13 67 6
8-91 Bus Jog 2 Speed 200 rpm 0 par. 4-13 67 6
10-00 CAN Protocol DeviceNet [1] [0 - 1] - 5
10-01 Baud Rate Select 125 Kbps [20] [20 - 22] - 5
10-02 MAC ID 63 0 - 63 0 5
10-05 Readout Transmit Error Counter 0 0 - 255 0 5
10-06 Readout Receive Error Counter 0 0 - 255 0 6
10-07 Readout Bus Off Counter 0 0 - 1000 0
10-10 Process Data Type Selection [0]/[2] [0 - 3] 0 5
10-11 Process Data Config Write 0 list 0 5
10-12 Process Data Config Read 0 list 0 5
10-13 Warning Parameter 0 0 - FFFF 0 5
10-14 Net Reference Off [0] [0 - 1] - 5
10-15 Net Control Off [0] [0 - 1] - 5
10-20 COS Filter 1 0 0 - FFFF 0 6
10-21 COS Filter 2 0 0 - FFFF 0 6
10-22 COS Filter 3 0 0 - FFFF 0 6
10-23 COS Filter 4 0 0 - FFFF 0 6
10-30 Array Index 0 0 - 255 0 6
10-31 Store Data Values Off [0] [0 - 2] - 5
10-32 DeviceNet Revision - - - 6
10-33 Store Always Off [0] [0 - 1] - 5
16-90 Alarm Word 0 0 - FFFF 0 7
16-92 Warning Word 0 0 - FFFF 0 7
6. Parameters FC 100/ 200/ 300 DeviceNet
66 MG.33.D3.02 - VLT
®
is a registered Danfoss trademark
6