User Guide
Table Of Contents
- Compressor model designation
- Danfoss scroll compression principle
- Features
- Technical specifications
- Dimensions
- Electrical data, connections and wiring
- Approval and certifications
- Operating conditions
- System design recommendations
- Specific application recommendations
- Sound and vibration management
- Installation
- Compressor handling and storage
- Compressor mounting
- Compressor holding charge
- System cleanliness
- Tubing
- Brazing and soldering
- System pressure test
- Leak detection
- Vacuum evacuation and moisture removal
- Filter driers
- Refrigerant charging
- Insulation resistance and dielectric strength
- Commissioning
- Oil level checking and top-up
- Ordering information & packaging
- Accessories
Application guidelines
11AB237986441643en-US0701
SM/SZ 148-161
Grommet
All dimensions in inch
Ø 10.47
7.32
7.79
17.33
7.87
3.92
6.24
4 holes
Ø 0.76
6.8
8.66
8.66
11.18
14.08
8.23
11.18
SM 148-161 code 3 SM 148-161 code 4
30°
23.27
7.09
14.79
4.54
10.65
Ø10.47
3.92
17.33
7.36
13.03
3.89
HM 8 bolt
Lock washer
Flat washer
Steel mounting sleeve
Rubber grommet
Nut
1.10 inch
Compressor
base plate
Dimensions