User Guide
Table Of Contents
- Compressor model designation
- Danfoss scroll compression principle
- Features
- Technical specifications
- Dimensions
- Electrical data, connections and wiring
- Approval and certifications
- Operating conditions
- System design recommendations
- Specific application recommendations
- Sound and vibration management
- Installation
- Compressor handling and storage
- Compressor mounting
- Compressor holding charge
- System cleanliness
- Tubing
- Brazing and soldering
- System pressure test
- Leak detection
- Vacuum evacuation and moisture removal
- Filter driers
- Refrigerant charging
- Insulation resistance and dielectric strength
- Commissioning
- Oil level checking and top-up
- Ordering information & packaging
- Accessories
Application guidelines
13AB237986441643en-US0701
SM/SZ 185 P, X, Y version
Grommet
All dimensions in inch
HM 8 bolt
Lock washer
Flat washer
Steel mounting sleeve
Rubber grommet
Nut
1.10 inch
Compressor
base plate
Brazed version Rotolock version
Ø 10.07
Ø 10.47
24.21
6.02
SANS COMPRESSION: 1.16
/ Without compression
AVEC COMPRESSION: 1.10
/ With compression
3.07
25.59
Ø 12.48
3.18
13.59
7.24
16.85
7.0
7.55
12
14.6
6.14
11
7.36
3.26
8.46
7.36
20.80±0.04
90°
35°
30°
90°
4 holes
Ø 0.76
Ø 10.47
Ø 10.07
25.55
24.17
7.36
8.46
153
77
Ø 12.48
13.59
7.67
16.85
6.73
11
7.28
7.55
12
14.06
7.0
3.18
3.26
6.02
20.80±0.04
SANS COMPRESSION: 1.16
/ Without compression
AVEC COMPRESSION: 1.10
/ With compression
4 holes
Ø 0.76
90°
35°
30°
90°
Dimensions