User Guide
Table Of Contents
- Compressor model designation
- Danfoss scroll compression principle
- Features
- Technical specifications
- Dimensions
- Electrical data, connections and wiring
- Approval and certifications
- Operating conditions
- System design recommendations
- Specific application recommendations
- Sound and vibration management
- Installation
- Compressor handling and storage
- Compressor mounting
- Compressor holding charge
- System cleanliness
- Tubing
- Brazing and soldering
- System pressure test
- Leak detection
- Vacuum evacuation and moisture removal
- Filter driers
- Refrigerant charging
- Insulation resistance and dielectric strength
- Commissioning
- Oil level checking and top-up
- Ordering information & packaging
- Accessories
Application guidelines
25AB237986441643en-US0701
Approvals and certicates
Pressure equipment
directive 2014/68/EU
Machines directives
2006/42/EC
Low voltage directive
2014/35/EU
Internal free volume
SM / SY / SZ scroll compressors comply with the
following approvals and certicates.
Certicates are listed on the product datasheets:
http://www.danfoss.com/odsg
CE 0062 or CE 0038 or CE0871
(European Directive)
All
SM / SY / SZ models
UL
(Underwriters Laboratories)
All 60 Hz
SM / SY / SZ models
Other approvals / certicates Contact Danfoss
Products SM/SZ084 to SY380
Manufacturer's declaration of incorporation Contact Danfoss
Products SM/SZ084 to SY380
Declaration of conformity Contact Danfoss
Products Internal free volume without oil (in
3
)
SM/SZ084 - 090 - 100 860
SM/SZ 110 - 120 897
SM 112 - 124 - SM/SZ 147 872
SM/SZ 148-161 1196
SM/SZ 175 - 185 and SY185 2014
SY 240 - 300 2307
SY 380 2392
Products SM084 to 185 SY185 SZ084 to 185 SY 240 to 380
Refrigerating uids Group 2 Group 2 Group 2 Group 2
Category PED II II II II
Evaluation module D1 D1 D1 D1
Maximum allowable Service
temperature - Ts
-31°F < Ts < 145°F -31°F < Ts < 142°F -31°F < Ts < 129°F -31°F < Ts < 126°F
Maximum allowable Service
pressure - Ps
368 psig 363 psig 363 psig 290 psig
Declaration of conformity Contact Danfoss
Approval and certifications