Operating instructions

VLT

2800, VLT

6000 HVAC and VLT

8000 AQUA Modbus RTU

VLT 2800

195NA139.10

Warning:

It can be extremely dangerous to touch the electrical parts even when the mains

supply has been disconnected.

Also ensure that other voltage inputs are disconnected from load sharing through the

DC bus.

Wait at least 4 minutes after the input power has been removed before servicing the

drive.

VLT 6000 HVAC

175HA490.11

Warning:

Touching the electrical parts may be fatal - even after the equipment has been

disconnected from mains.

Using VLT

6002 - 6005, 200-240 V: Wait at least 4 minutes

Using VLT

6006 - 6062, 200-240 V: Wait at least 15 minutes

Using VLT

6002 - 6005, 380-460 V: Wait at least 4 minutes

Using VLT

6006 - 6072, 380-460 V: Wait at least 15 minutes

Using VLT 6102 - 6352, 380-460 V: Wait at least 20 minutes

Using VLT 6400 - 6550, 380-460 V: Wait at least 15 minutes

Using VLT

6002 - 6006, 525-600 V: Wait at least 4 minutes

Using VLT

6008 - 6027, 525-600 V: Wait at least 15 minutes

Using VLT

6032 - 6275, 525-600 V: Wait at least 30 minutes

MG.10.S2.02 - VLT is a registered Danfoss trademark