Specifications

Control card, 10 V DC output

Terminal number 50

Output voltage 10.5 V ±0.5 V

Max. load 25 mA

All inputs, outputs, circuits, DC supplies and relay contacts are galvanically isolated from the supply voltage (PELV) and

other high-voltage terminals.

Surroundings

Enclosure IP20

Enclosure kit available IP21, TYPE 1

Vibration test 1.0 g

Max. relative humidity 5%-95% (IEC 60721-3-3; Class 3K3 (non-condensing) during operation

Aggressive environment (IEC 60721-3-3), coated (standard) frame H1-H5 Class 3C3

Aggressive environment (IEC 60721-3-3), non-coated frame H6-H10 Class 3C2

Aggressive environment (IEC 60721-3-3), coated (optional) frame H6-H10 Class 3C3

Aggressive environment (IEC 60721-3-3), non-coated frame I2-I8 Class 3C2

Test method according to IEC 60068-2-43 H2S (10 days)

Ambient temperature See max. output current at 40/50 °C in 8.1.2 Mains Supply 3x380-480 V AC

Derating for high ambient temperature, see 8.5 Derating according to Ambient Temperature and Switching

Frequency8.5 Derating according to Ambient Temperature and Switching Frequency.

Minimum ambient temperature during full-scale operation 0 °C

Minimum ambient temperature at reduced performance -20 °C

Minimum ambient temperature at reduced performance -10 °C

Temperature during storage/transport -30 to +65/70 °C

Maximum altitude above sea level without derating 1000 m

Maximum altitude above sea level with derating 3000 m

Derating for high altitude, see

Safety standards EN/IEC 61800-5-1, UL 508C

EMC standards, Emission EN 61800-3, EN 61000-6-3/4, EN 55011, IEC 61800-3

EMC standards, Immunity

EN 61800-3, EN 61000-3-12, EN 61000-6-1/2, EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN

61000-4-5, EN 61000-4-6

General Specifications and ...

VLT

HVAC Basic Drive FC 101 Design Guide

108 MG18C502 - Rev. 2013-09-06