Installation Guide

Adjustable

Wrench

Llave ajustable

Pince à bec effilé

Clé à molette

Needle-nose Pliers

Alicates de extremos finos

Shown/Mostrado/Illustré

D462032/D462033/D462034/D462035

Five Function Handshower

Douche à main de 5 fonctions

Ducha de mano con 5 funciones

1. Remove the existing showerhead from the showerarm. Clean the debris from the

inside showerarm and the showerarm threads. Run water to flush the residual

debris from the inside arm (Fig 1).

2. Wrap the threads of the showerarm with plumber’s tape (included) (Fig 2).

3. Screw the showerarm mount onto the showerarm supply pipe threads (Fig 3).

4. Connect the shower hose to the bottom outlet of the showerarm mount and

handshower (Fig 4).

5. Place the handshower with conical attached into the showerarm mount holder (Fig 5).

PAGE 1
Five Function Handshower Ducha de mano con 5 funciones Douche à main de 5 fonctions Adjustable Wrench Needle-nose Pliers Llave ajustable Alicates de extremos finos Clé à molette Pince à bec effilé D462032/D462033/D462034/D462035 Shown/Mostrado/Illustré 1. Remove the existing showerhead from the showerarm. Clean the debris from the inside showerarm and the showerarm threads. Run water to flush the residual debris from the inside arm (Fig 1). 2.
PAGE 2
1. Remove the handshower from the hose by unscrewing the hose conical counter-clockwise (Fig 1). 2. The flow controller/ check valve is located at the opening of the handshower handle and has a different color plastic housing than the handshower conical threads (Fig 2). Use the needle-nose pliers to grasp the flow controller/ check valve and pull the flow controller/ check valve out.
PAGE 3