SDS

--------------------------------------------------------------------------
Product Name: Original Contact Cement
Revision Date: 08/11/1999 Page 4
|-------------------------------------------------------------------------|
| SECTION 7 - HANDLING AND STORAGE |
|-------------------------------------------------------------------------|
OTHER PRECAUTIONS: Intentional misuse by deliberately concentrating and
inhaling vapors may be harmful or fatal. Do not take internally.
Construction and repair activities can adversely affect indoor air
quality. Consult with the occupants or other representative(i.e.
maintenance,
building manager, industrial hygienist, or safety officer) to determine
ways to minimize any impact.
|-------------------------------------------------------------------------|
| SECTION 8 - EXPOSURE CONTROLS/PERSONAL PROTECTION |
|-------------------------------------------------------------------------|
ENGINEERING CONTROLS: Provide sufficient mechanical ventilation (local or
general exhaust) to maintain exposure below PEL and TLV. Vapors are
heavier than air and will collect in low areas. Check all low areas
(basements, sumps, etc.) for vapors before entering.
RESPIRATORY PROTECTION: If 8 hour exposure limit or value is exceeded for
any component, use an approved NIOSH/OSHA respirator. Consult your safety
equipment supplier and the OSHA regulation, 29 CFR 1910.134 for respirator
requirements. A respiratory protection program that meets OSHA 1910.134 and
ANSI Z88.2 requirements must be followed whenever workplace conditions
warrant a respirator's use.
EYE PROTECTION: Goggles or safety glasses with side shields.
SKIN PROTECTION: Solvent impervious gloves.
OTHER PROTECTIVE EQUIPMENT: Provide eyewash and solvent impervious apron
if body contact may occur.
HYGIENIC PRACTICES: Remove contaminated clothing and wash before reuse.
|-------------------------------------------------------------------------|
| SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES |
|-------------------------------------------------------------------------|
BOILING RANGE : 170 - 180 F VAPOR DENSITY : Is heavier than air
ODOR : Hydrocarbon
APPEARANCE : Tan Mobile Liquid EVAPORATION RATE: Is faster than
Butyl
SOLUBILITY IN H2O : Negligible Acetate
SPECIFIC GRAVITY : 0.8903
VAPOR PRESSURE : 70 mm Hg @ 68F.
PHYSICAL STATE : Liquid
(See Section 16 for abbreviation legend)
(Continued on Page 5)